It replaces up to three standard switches and it’s suited for motors provided with parking switch. It works either with single speed motors and with double speed motors.
Three buttons in the switch allow to manage all the functions needed for windscreen cleaning: ON/OFF, timing and washing program.
It is user friendly and it can be easily installed in few minutes, no screws are needed.
Features
- 3 intermittent speed
- one or two continuous speed
- motor brake
- washing program
- dimmer input
- Easy to install
- Plug-in connector
- Fast-on contacts for motor connections.
| CT43P | |
|---|---|
| Power supply | 10V to 30V DC |
| Internal fuses | 12A PTC for each motor |
| Stand-by current | Less than 20 mA |
| Protections | Polarity inversion |
| Motors- output currents | Single or double speed – each motor 12 Amps max. |
| Inputs | 3 parking switches (open in park position) Dimmer (see relay box connections paragraph) |
| Outputs | 3 slow speed – SLOW 3 high speed – FAST (if present) 1 wash pump (positive pole) |
| Functions | 3 intermittent settings 2 continuous speeds, slow and high speed Wash / wipe program Switches led brightness regulation (if present) |
| Connections | Relay box 3x 4 poles connectors 2x male 9,5 mm fast-on 2 1x 8 poles connectors RJ45 (can bus network) Active switch 1x 8 poles connectors RJ45 (can bus network) 1x 10 poles teleph. conn. Passive switch 1x 10 poles teleph. conn. |
| Case | Relay box Grey ABS Switch Black ABS |
| Working temperature | -25 °C / +55 °C |
| Storage temperature | -30 °C / +80 °C |