CT2N5 is a microcontroller-based wiper control system for 5 wiper motors.
CT2N5 is composed of one control panel CP4P5 and one relay box SRM5P.
Control panel is connected to relay box by one serial cable (CANBUS cable) with two 8 pole plugs. Every unit has two plugs (in parallel) and any one or both can be used.
Each wiper can be switched on one by one.
Features
- three intermittent speeds (four in case of single speed motor)
- one or two continuous speeds
- synchronized brushes at any mode
- motor brake
- washing program
- an additive control panel CP4P5 can be added to work from different stations
| CT2N5 | |
|---|---|
| Power supply | 10V to 30V DC |
| Internal fuses | 12A self-resetting fuse for each motor |
| Stand-by current | Less than 70 mA at 10V and less than 40 mA at 30V |
| Protections | Polarity inversion |
| Motors- output currents | Single or double speed – each motor 12 Amps max. |
| Inputs | From 2 to 5 parking switches (open in park position) |
| Outputs | 5 SLOW speed Imax = 12A 5 HIGH speed (if using two speed motors) Imax = 12A 1 wash pump (positive pole) SLOW Imax = 1A |
| Functions | 3 or 4 intermittent settings 1 or 2 continuous speeds (slow and high speed) Wash / wipe program Wash / wipe program |
| Connections | Relay box SRM5P 5x 4 poles connectors 4x male 9,5 mm fast-on 1x male 6,3 mm fast-on 2x 8 poles connectors RJ45 (can bus network) Control panel CP4P5 2x 8 poles connectors RJ45 (can bus network) |
| Case | Relay box: Grey ABS Control panel: Metal case Frontal panel protection IP65 |
| Working temperature | -25 °C / +50 °C |
| Storage temperature | -30 °C / +80 °C |